Horizontal die-caster-machine able to create long and short run products as well as large surface, thin walled products, which require a wide variety of die-casting settings when dealing with different raw materials and a high number of repeats.
The traditional XYZ coordinate allow guidance and operation in 3D, therefore cutting quality and precision can be retained despite changing thickness of the cut material. By installing jury-mast traverse along a C plane low hardness materials prone to waving and crumplin, such as films is made possible. The point of the process is that instead of a fixed head a negotiable head with a mounting to fasten it is introduced and is guided through software. The result: quicker cutting and a decrease in material waste, thus a decrease in costs. The machine’s construction furthermore allows the use of water-, plasma- and flame-cutter heads, thus allowing for a more flexible use.
Electric spearation fulfills a crucial role in the separation of waste with metal content, between conductors and non-conductors. Separating particles of both type are crown-electrode drum-separators, which work based on the different charges (electrons attached to the surface of particles in an enviroment ionized by the elecrtodes) and differing charge-losses (transfusion), by which the electrostatic forces conductor particles in contact with the grounded rotor drum take on its charge and so are repulsed from it. Insulating particles, retaining their charges, attach to it which carries them on with itself.
Reversable cross-line separator, which can be placed perpendicularly above the flow of material to be separated. The magnet in its centre ensures the constant magnetic field. In terms of being economical, the constant magnetism is more cost-efficient, as it requires no electricity. Magnetic particles jump up from the material flow, from where the upper line carries it to where it is no longer under the magnet and where the particles fall off. It is advisable to use it with low iron content material. Upper magnetic separators allow the highest efficiency of dissemination of any ferro-magnetic material of any size. Permanent magnetic apparatuses placed above carrier bands possess automatized bands for self-cleaning or manually cleaned, detachable plastic rugs.
The main characteristic of the rotary dial shredder is strength and reliability. The device consists of a feeder and gorge. The feeding hole’s role is to provide unsupervised, simple transit of the material into the shredding space. The core of the device is made up by th specially sharpened and tempered, grinder talons. The role of these talons to halt and move the raw material between the conjoined cutting discs placed on two or more axels. The shredding is done by the also talon-shaped special cutting discs. In cases of material overdosage or it getting stuck the device will temporarily reverse its movements to prevent overloading and potential damage.
Analysis device for compositions and alloys, which can produce fast and precise elemental analysis without the aid of auxiliary gas, or vacuum X-ray. Due to the XRF-method the surface preparation of the samples is mostly not necessary, and is only minimally required with the most polluted cases. The device can be easily used even on a surface of a 5 Ft coin, thus it is capable for the examination of weldments, cables or other small-sized samples. With the newly developed silicium drift detector (SDD)detection of light metals (Ti, Al, Mg, Si) is also possible without vacuum and auxiliary gases.
Capacity: posted material‘s specific weight, particle size, wetness and geometry, also the screen surface‘s mathematical function. In the case of δ= 1 density, normal structure (grainy), dry posted material and a 10 mm screen punching results in about 1/ hour.
The most important part of single axel conical croups is the mandrel, which is equipped with the cutting tools. The shredder’s hydraulically guided pushplate pushes the material towards the mandrel. If the resistance proves too much, the electronic guidance pulls the pushplate back, thus reducing pressure. The shredders are given extra protection to insure longevity and safety.
Single axel shredders are perfectly suitable for grinding and shredding plastic and light metals.
Electric separation fulfills a very important role in the separation of metal-containing waste, foremost in the separation of conductors and non-conductors.
Vortex current separation is based on the phenomenon of the charge being forced into a circular pattern by the Lorentz-current when in a high-speed conductor within a magnetically inductive space. Due to this the created eddy current’s magnetic field is the opposite charge to its parent magnetic field, so the conductor takes up a perpendicular positionon a plane (gets thrown). All this is without effect on the movement of the non-conductive material‘s particles and pieces.